Wood guide
Choosing a wood for your furniture
Walnut, white oak, cherry, maple and ash compared by look, hardness, how they age and what they cost.
The short version
- Walnut if you want dark, rich and the most requested look.
- White oak if you want tough, timeless and a little texture.
- Cherry if you love wood that deepens with age.
- Maple if you want pale, smooth and very hard.
- Ash if you want the oak look for a little less.
| Wood | Color | Janka hardness (lbf) | How it ages | Relative cost |
|---|---|---|---|---|
| Black walnut | Chocolate brown, purple-gray streaks | ~1,010 | Lightens slightly to warm brown | $$$ |
| White oak | Light tan to golden, ray fleck when quartersawn | ~1,360 | Ambers gently | $$ |
| Cherry | Salmon pink when new | ~950 | Darkens to deep red-brown | $$ to $$$ |
| Hard maple | Creamy white | ~1,450 | Yellows slightly | $$ |
| Ash | Pale with bold grain | ~1,320 | Ambers slightly | $ |
Janka values are typical published figures and vary board to board.
Walnut
America’s favorite furniture hardwood for good reason. It machines beautifully, takes a finish like glass, and its dark color makes small dents and scratches hard to see. It’s softer than oak or maple, so it suits people who’d rather a table show a little life than look brand new forever.
White oak
The workhorse. White oak is hard, stable and naturally rot resistant, which is why it built ships and barrels. Flatsawn oak shows cathedral grain; quartersawn oak shows shimmering ray fleck and is the most stable cut of all. It suits farmhouse, Craftsman, Scandinavian and modern designs equally well.
There’s no wrong wood. There’s only the wood that fits how you live.
Cherry
Cherry is the slow reveal. Fresh from the shop it’s pinkish and pale, then over the first year in daylight it deepens into the warm red-brown people picture when they think of heirloom furniture. Keep things off a new cherry top for the first few months so it darkens evenly.
Maple
Hard maple is the hardest of our core species and the traditional choice for butcher blocks and bowling alleys. Its tight, even grain gives a clean, modern look. Figured maple (curly or birdseye) is available on request.
Ash
Ash looks a lot like oak with bolder grain, and it’s usually the most affordable of our hardwoods. It’s strong and flexible, which is why baseball bats and tool handles are made from it. A good choice for a big table on a tighter budget.
Which finish?
Hardwax oil looks and feels like natural wood and can be spot-repaired at home, but needs a refresh every year or two. Catalyzed varnish is the toughest against water, heat and stains, and is our usual recommendation for dining tables in busy homes. We’ll suggest one when you get your quote.
FAQ
Questions people ask
What is the most durable wood for a dining table?
Of the common furniture hardwoods, hard maple and white oak are the hardest and resist dents best. Hickory is harder still but less common in fine furniture. Walnut and cherry are softer but age beautifully and hide wear well.
Why does walnut cost more than oak?
Walnut trees are smaller and slower growing, so wide, clear walnut boards are scarcer. Expect a walnut piece to cost roughly 35 to 50% more than the same piece in oak or maple.
Does cherry wood darken?
Yes. Cherry starts a pale salmon pink and darkens to a deep reddish brown within six to twelve months of exposure to light. It’s one of the reasons people love it.
Is solid wood better than veneer?
Solid wood can be sanded and refinished many times and won’t delaminate. Quality veneer over a stable core has its place, but every Sovereign Woodworks piece is solid hardwood.
Found your wood?
Tell us the piece and we’ll send a sketch and fixed quote in the species you choose.
Start a commission